18
COMMON ID SETUP (DIGITAL)
Common ID is a signaling system designed for Digital communications. When
a channel is setup with an ID, squelch will only open when a call containing a
matching Common ID is received. If a call containing a different Common ID is
made on the same channel you are using, you will not hear the call. This allows you
to ignore (not hear) calls from another parties who are using the same channel.
To change the ID settings of a channel of Digital:
1
During Setup Mode Selection, rotate the
Selector
to select a channel number.
• The transceiver announces the zone number and channel number.
2
Press the
Side 1
or
Side 2
button to select the Common ID Setup Mode.
• The transceiver announces “ID”.
3
Press the
PTT
switch to enter the Common ID setup mode.
• The transceiver announces the ID number (1 to 255).
4
Press the
Side 1
or
Side 2
to increment/ decrement the ID number.
• Press and hold the
Side 1
or
Side 2
button to increment/ decrement the ID
number by 5 at a time.
• A voice announcement will inform you of the currently selected ID number.
5
Press the
PTT
switch to temporary save the selected ID number.
• Beep B (2 beeps) will sound.
• Repeat steps 1 to 5 to set up another channel.
6
Press the
Side 1
or
Side 2
button to select the Confirmation Setup Mode.
•
The transceiver announces “Confirm”.
7
Press the
PTT
switch to save the settings and return to the Zone Selection.
• Beep B (2 beeps) will sound.
8
Turn the transceiver power OFF and then ON again to activate the new settings.
Note:
◆
If no action is performed for 20 seconds, the transceiver will automatically return to
normal operation without changing any settings.
Summary of Contents for TK-3701D-E
Page 1: ...USER MANUAL TK 3701D B5A 3234 00 01_EN ...
Page 31: ... 2020 ...
