14
FREQUENCY SETUP
1
During Setup Mode Selection, rotate the
Selector
to select a channel number.
• The transceiver announces the zone number and channel number.
2
Press the
Side 1
or
Side 2
button to select the Frequency Setup Mode.
• The transceiver announces “Channel”.
3
Press the
PTT
switch to enter the Frequency Setup Mode.
4
Press the
Side 1
or
Side 2
button to increment/ decrement the frequency table
number, to select the new channel frequency.
• Voice announcement: “Analogue Table X” (X = 1 to 16 for Analogue
Frequency).
• Voice announcement: “Digital Table X” (X = 1 to 32 for Digital Frequency).
• Table numbers and their corresponding operating frequencies are provided
in the table {p. 15}.
• A voice announcement will inform you of the currently selected frequency
table number.
5
Press the
PTT
switch to temporary save the selected frequency table number.
• Beep B (2 beeps) will sound.
• Repeat steps 1 to 5 to set up another channel.
6
Press the
Side 1
or
Side 2
button to select the Confirmation Setup Mode.
•
The transceiver announces “Confirm”.
7
Press the
PTT
switch to save the settings and return to the Zone Selection.
• Beep B (2 beeps) will sound.
8
Turn the transceiver power OFF and then ON again to activate the new settings.
Note:
◆
If no action is performed for 20 seconds, the transceiver will automatically return to
normal operation without changing any settings.
Summary of Contents for TK-3701D-E
Page 1: ...USER MANUAL TK 3701D B5A 3234 00 01_EN ...
Page 31: ... 2020 ...
