TK-3302
3
REALIGNMENT
1. Modes
User mode
Data programming mode
PC test mode
PC tuning mode
PC mode
Mode
Function
User mode
For normal use.
PC mode
Used for communication between the trans-
ceiver and PC.
Data programming
mode
Used to read and write frequency data and
other features to and from the transceiver.
PC test mode
Used to check the transceiver using the PC.
This feature is included in the FPU.
SYSTEM SET-UP
2. How to Enter Each Mode
Mode
Operation
User mode
Power ON
PC mode
Received commands from PC
3. PC Mode
3-1. Preface
The transceiver is programmed by using a personal com-
puter, a programming interface (KPG-22/22A, USB adapter
(KCT-53U)) and FPU (programming software).
The programming software can be used with a PC. Figure
1 shows the setup of a PC for programming.
3-2. Connection Procedure
1. Connect the transceiver to the personal computer with
the interface cable and USB adapter (when the interface
cable is KPG-22A, the KCT-53U can be used).
Merchandise received
Choose the type of transceiver
Transceiver programming
Delivery
Are you using the speaker microphone?
A personal computer, programming interface (KPG-22/22A),
and FPU (programming software) are required for programming.
(The frequency, TX power HI/LOW, and signalling data are
programmed for the transceiver.)
YES
NO
KMC-17, KMC-21 or KMC-45
Speaker microphone
(Option)
Are you using the optional antenna?
YES
NO
KRA-23 or KRA-27
Optional antenna
TX/RX 440~470
TX/RX 400~430
4.0W
4.0W
Frequency range (MHz) RF power
Type
TK-3302: E,T
TK-3302: E3
