TK-3000
3
SYSTEM SET-UP
Choose the type of transceiver
Transceiver programming
Delivery
Are you using the speaker microphone?
A personal computer, programming interface (KPG-22/22A),
and FPU (programming software) are required for programming.
(The frequency, TX power HI/LOW, and signaling data are
programmed for the transceiver.)
YES
NO
KMC-21 or KMC-45
Speaker microphone
(Option)
Are you using the optional antenna?
YES
NO
TX/RX 440~480
4.0W
TK-3000 K,M,M3,M7
Frequency range (MHz)
RF power
Type
Merchandise received
Optional antenna
KRA-23 or KRA-27
TX/RX 400~430
TX/RX 350~390
TX/RX 440~470
TK-3000 M2,M4
TK-3000 M6
TK-3000 E,T2
GENERAL
INTRODUCTION
SCOPE OF THIS MANUAL
This manual is intended for use by experienced techni-
cians familiar with similar types of commercial grade com-
munications equipment. It contains all required service
information for the equipment and is current as of the pub-
lication date. Changes which may occur after publication
are covered by either Service Bulletins or Manual Revisions.
These are issued as required.
ORDERING REPLACEMENT PARTS
When ordering replacement parts or equipment informa-
tion, the full part identifi cation number should be included.
This applies to all parts : components, kits, or chassis. If the
part number is not known, include the chassis or kit number
of which it is a part, and a suffi cient description of the re-
quired component for proper identifi cation.
PERSONAL SAFETY
The following precautions are recommended for personal
safety:
• DO NOT transmit until all RF connectors are verifi ed
secure and any open connectors are properly terminated.
• SHUT OFF and DO NOT operate this equipment near
electrical blasting caps or in an explosive atmosphere.
• This equipment should be serviced by a qualifi ed techni-
cian only.
SERVICE
This transceiver is designed for easy servicing. Refer
to the schematic diagrams, printed circuit board views, and
alignment procedures contained within.
Model
Type
TX-RX unit
Frequency
range
Remarks
TK-3000
K,M,M3,M7 X57-8103-00 440~480MHz
IF1: 38.85MHz
LOC: 38.4MHz
M2,M4
X57-8103-01 400~430MHz
M6
X57-8100-23 350~390MHz
E,T2
X57-8102-71 440~470MHz
