14
S
ELECTING
A
Z
ONE
AND
C
HANNEL
Select the desired zone using the selector or the keys
programmed as
Zone Up
/
Zone Down
.
•
The default setting for the selector is
Zone Up/ Down
.
Select the desired channel using the selector or the keys
programmed as
Channel Up
/
Channel Down
.
•
The default setting for the
<B
key is
Channel Down
.
•
The default setting for the
C>
key is
Channel Up
.
Names can be programmed for channels with up to
8 characters each. The transceiver will display either the
channel name or the zone and channel number. Press the
key programmed as
Display Character
to toggle between the
two displays.
T
RANSMITTING
1
Select your desired zone and channel using the selector
and the
Zone
or
Channel
keys.
2
Press the key programmed as
Monitor
or
Squelch Off
to
check whether or not the channel is free.
•
If the channel is busy, wait until it becomes free.
3
Press the
PTT
switch and speak into the microphone in
your normal speaking voice.
•
For best sound quality at the receiving station, hold the
microphone approximately 1.5 inches (3 ~ 4 cm) from your
mouth.
4
Release the
PTT
switch to receive.
R
ECEIVING
1
Select your desired zone and channel using the selector
and the
Zone
or
Channel
keys.
•
Alternatively, you can turn the Scan function on if desired.
2
When you hear a caller’s voice, readjust the volume as
necessary.
