7
I
NSTALLING
THE
C
AP
OVER
THE
S
PEAKER
/ M
ICROPHONE
J
ACKS
If you are not using an optional
speaker/ microphone, install the
cap over the speaker/ microphone
jacks using the supplied 3 x 6 mm
screw.
Note:
To keep the transceiver water
resistant, you must cover the
speaker/ microphone jacks with the
supplied cap.
I
NSTALLING
THE
(O
PTIONAL
) S
PEAKER
/ M
ICROPHONE
OR
H
EADSET
1
Insert the speaker/ microphone
or headset plugs into the
speaker/ microphone
jacks.
2
Install the speaker/ microphone
locking bracket over the plugs
using the supplied 3 x 6 mm
screw.
Note:
The transceiver is not fully
water resistant when using a
speaker/ microphone or headset.