6
I
NSTALLING
THE
A
NTENNA
Screw the antenna into the
connector on the top of the
transceiver by holding the antenna
at its base and turning it clockwise
until secure.
Note:
The antenna is neither a
handle, a key ring retainer, nor a
speaker/ microphone attachment
point. Using the antenna in these
ways may damage the antenna and
degrade your transceiver’s
performance.
I
NSTALLING
THE
B
ELT
C
LIP
If desired, attach the belt clip using
the two supplied 3 x 8 mm screws.
Note:
◆
If the belt clip is not installed, its
mounting location may get hot
during continuous transmission
or when left sitting in a hot
environment.
◆
Do not use glue which is designed
to prevent screw loosening when
installing the belt clip, as it may
cause damage to the transceiver.
Acrylic ester, which is contained in
these glues, may crack the
transceiver’s back panel.
