8
■
Priority Scan
A priority channel must be programmed in order
for Priority Scan to operate. A “P” appears on the
display when the priority channel is selected.
During Scan, the transceiver automatically reverts
to the priority channel when a signal is received on
it, even if a signal is being received on your current
channel.
Note:
◆
Your dealer programs the amount of time it takes for the
transceiver to check for a signal on the priority channel.
◆
If programmed by your dealer, you can temporarily add or
delete the priority channel from the scan sequence.
◆
Your dealer can program Scan to cancel the priority channel
QT/DQT tone (if a tone is set up on the channel) during Scan
so that all calls on the priority channel will be heard.
Summary of Contents for TK-190
Page 1: ...INSTRUCTION MANUAL B62 2498 10 K VHF FM TRANSCEIVER TK 190 ...
Page 32: ......
