manualshive.com logo in svg

Kenwood TK-190, Service Manual, Page: 10 / 54

Share
Download
Kenwood TK-190 Service Manual Download Page 10

10

TK-190

4. Firmware Programming Mode

4-1. Preface

Flash memory is mounted on the transceiver.  This al-

lows the transceiver to be upgraded when new features are
released in the future.  (For details on how to obtain the firm-
ware, contact Customer Service.)

4-2. Connection Procedure

Connect the transceiver to the personal computer (IBM

PC or compatible) with the interface cable (KPG-36).  (Con-
nection is the same as in the PC Mode.)

3. Clone Mode

1. Turn the master side transceiver power on with the [Side 1]

and [Side 2] keys held down.
The master side transceiver displays "CLONE".

2. Set the power switch on the slave side transceiver to

ON.

3. Connect the cloning interface cable between the master

side transceiver (source) and slave side transceiver
(clone) as shown in the figure.

4. Press the [PTT] key on the master side transceiver to

start cloning.

5. The red LED on the master side transceiver flashes when

cloning starts and an "END" message appears when clon-
ing ends.

6. The green LED on the slave side transceiver flashes.
7. When a problem occurs during cloning, an "ERROR" mes-

sage appears on the master side transceiver.

8. Pressing the [PTT] key sets clone mode again.

[PTT]

[PTT]

[PTT]

CLONE

START

END

Red lamp flashes

Cloning interface cable
Part No. E30-3325-05

 REALIGNMENT

PC mode

PC programming mode

PC test mode

PC tuning mode

Clone mode

Panel test mode

LCD all lamp mode

Panel tuning mode

Memory Clear function

Main programming mode

User mode

Mode

Function

User mode

Customer use this mode

PC mode

Communication between the radio

and PC (IBM compatible).

It requires the KPG-59D

PC programming mode

Frequency, signalling and features

write to the radio and read from

the radio.

PC test mode

Check the radio using the PC.

This feature is included in the FPU.

Panel test mode

Dealer use to check the fundamen-

(Refer to Adjustment)

tal characteristics.

Main programming mode

Re-write the firmware of the flash

ROM.

2. How to Enter Each Mode

Mode

Operation

User mode

Power on

PC mode

Turn on the transceiver.

Then, set the transceiver to PC

mode from the menu in KPG-59D

Panel test mode

Hold down the [Side 2] key and

[PTT], turn the radio power on, and

release [PTT] first.

Main programming mode

Held down the [Side 2] key and

[PTT], turn the radio power on, and

release [Side 2] key first.

1. Mode

Summary of Contents for TK-190























































Reviews:

No comments