Kenwood STZ-RF200WD, Instruction Manual

Page: 4 / 80

4
Safety Precautions
These symbols denote explanations to prevent injuring yourself and others,
and prevent damage to property.
■ Safety icons used in this guide
Warning
Describes information that could result in death or serious injury if not followed.
Caution
Describes information that could result in bodily injury or damage to property.
This icon indicates important cautions (and warnings).
This icon indicates actions to avoid (prohibited actions).
This icon indicates actions that must be taken (mandatory and indicated actions).
Warning
Installation and Wiring
• Do not install equipment in locations that interfere with line-of-sight or vehicle op-
erations or in locations that pose a danger to passengers
• Do not install equipment in locations subject to high temperatures, such as close
to the engine, muffler, etc.
• Ensure that installed equipment and the ground wire do not use a nut or bolt from
the vehicle’s safety systems (handlebar, brakes, gas tank, etc.)
• Do not let water or foreign matter enter the unit
• Ask a specialist to install and wire the unit for safety
• Install and wire the unit as described in this instruction manual
• Install wires so that they do not interfere with steering the vehicle
• Use tape to insulate any bare sections on wires
• Check that the vehicle’s electronic components operate properly after installation
and wiring