Normal Kettle Operation
Variable Temperature Feature
Recommended Temperature Setting Chart
This is for guidance only and temperatures
can be selected for personal preference.
Temp Setting
Recommended for
70°C
White tea
75°C
Green tea
80°C
Jasmine tea
85°C
Oolong tea
90°C
Instant coffee
95°C
Herbal teas and infusions
Black
Peppermint
Camomile
100°C
Instant drinks where
boiled water
recommended.
1 Press the ON/OFF button and
the button will light up and
100°C will be shown on the
display screen.
Note: The default temperature
is always 100°C
2 Set the temperature between
70, 75, 80, 85, 90, 95 or
100°C so that the most
suitable temperature can be
selected (Refer to the
“Recommended Temperature
Setting Chart”).
3 To select the desired
temperature press either the
(-) or (+) button until the
required temperature is shown
on the display screen.
•
The Keep Warm feature
will not operate if 100°C
is selected.
4 At the end of the heating cycle
the kettle will switch off
automatically with an audible
alert and the selected
temperature will flash on the
display screen.
• If the heating operation is manually stopped or the
kettle is removed from the powerbase the display will
show the last selected temperature when switched
back on.
• If the kettle is unplugged the display screen will
default to 100°C.
1 Plug in and the display will
be blank.
2 Press the ON/OFF button and
the button will light up, flash
and the water will start to boil.
100°C will be shown on the
display screen.
Note: The default temperature
is always 100°C.
3 At the end of the boiling cycle
the kettle will switch off
automatically with an audible
alert, 100°C will flash on
the display screen and the
ON/OFF button will remain lit.
4 To switch off the kettle manually
press the ON/OFF button, the
display screen will switch off
and the kettle will go into
Standby mode.
NOTE:
• Once the boiling cycle has finished the kettle will
automatically switch off after 30 seconds. The
display screen will switch off and the kettle will go
into standby mode.
• If the kettle is removed from the powerbase at any
time the kettle will switch off automatically and go
into standby mode. Press the ON/OFF button to
reset.
• The kettle will automatically switch off if no function
has been selected within 30seconds.
•
Always unplug the kettle when not in use.
4