Kenwood ProTalk NX-P500 User Manual Download

Page: 18 / 68

Encryption (Digital)

When the Channel Type is Digital (NXDN), encryption can be performed by using

the encryption key during voice call, and further communication with enhanced

confidentiality can be performed.

Enter the Setting mode {p.37}.

Press the

button to select “

”.

Press the

Menu

button then press the

button to select the

encryption key code from 1 to 32767.

Enter the Channel setup mode {p.15}.

Press the

button to select “

(Digital)

”.

Press the

Menu

button then press the or button to select your desired

value.

OFF

The Encryption (Digital) function is deactivate.

The Encryption (Digital) function is activate.

• The

PRIVACY

icon appears on the display when “ON ” is selected.

Press the

Menu

button to confirm the selection, then press the

PTT

switch or

the

Side

button to return to the operation mode.

Note:

◆

Please match channel number, group number, or Encryption key setting with the other

party. Calls can not be made unless all settings match.

Summary of Contents for ProTalk NX-P500





































































Search results

Summary of Contents for ProTalk NX-P500

Reviews:

Related manuals for ProTalk NX-P500

Brands by name

Popular brands

Kenwood ProTalk NX-P500, User Manual

Search results

Summary of Contents for ProTalk NX-P500

Reviews:

Related manuals for ProTalk NX-P500

Brands by name

Popular brands