19
Channel
Number
LED
Voice Announcement Number of times LED
blinks
13
Purple
"Thirteen"
1
14
"Fourteen"
2
15
"Fifteen"
3
16
"Sixteen"
4
•
Press the
PF-2 key to switch between Volume Adjustment mode
and Channel Select mode.
2 To make a call, press and hold the PTT switch, then speak into
the microphone using your normal speaking voice.
•
Hold the microphone approximately 1.5 inches (3 to 4 cm) from
your mouth.
3 Release the PTT switch to receive.
Note:
◆
When the battery pack voltage becomes too low, transmission will
stop and an alert tone will sound. (Low Battery Warning: While
operating the transceiver, the Low Battery Warning sounds an alert
tone every 30 seconds and the LED indicator blinks red when the
battery needs recharged or replaced.)
◆
Even when setting the volume to 0, the transceiver will continue to
emit beep sounds and channel announcements.
◆
Continuously transmitting when the transceiver becomes too hot
will cause the output power to decrease and may eventually stop
transmission. Stop transmitting for a while to allow the transceiver to
cool down.
◆
You may sometimes hear noise during communications, depending on
the caller’s transceiver.
