18
BaSIC oPERaTIonS
PowER anD VoLuME
1 Hold the Power switch for approximately 1 second to switch the
transceiver power ON.
•
A beep sounds and the LED indicator blinks blue a number of
times as described in the “BATTERY LEVEL GUIDE” table on
page 20.
•
To turn the power OFF, hold the
Power switch for 2 seconds.
2 In Volume Adjustment mode, press the Up/Down keys to adjust
the volume.
•
Press the key programmed as
[Squelch Off] to hear background
noise.
•
Press the
PF-2 key to switch between Volume Adjustment mode
and Channel Select mode.
TRanSMITTInG anD RECEIVInG
1 In Channel Select mode, press the Up/Down keys to select your
desired channel.
•
After selecting a channel, the channel number is announced and
the LED indicator blinks to indicate the current channel number.
For example, to indicate the channel number 5, the LED blinks
blue once and a voice announces “Five”.
Channel
Number
LED
Voice Announcement Number of times LED
blinks
1
Yellow
"One"
1
2
"Two"
2
3
"Three"
3
4
"Four"
4
5
Blue
"Five"
1
6
"Six"
2
7
"Seven"
3
8
"Eight"
4
9
Green
"Nine"
1
10
"Ten"
2
11
"Eleven"
3
12
"Twelve"
4
