7.
MA INTENANCE
7-1.
Removing the case
The case can
be
removed
by
taking out the screws on the top and side panels
and pulling the case upwards.
J
Screws
Figure 8.
7-2. Changing the rated source voltage
To change the AC source voltage of the machine, change the internal power
transformer and fuse specifications as shown in the figure below.
Supply voltage conversion and fuse
replacement
To the switch primary AC voltage. \
reconnect the connector according
to the desired voltage. /
VoItage-SwItching/Fuse PC Board (View from Component Side)
14
'To sftitch the secondary voltage. '
reconnect jumper lines and solder
them according to the desired
.voltage. )
For 120/240V,
i n s e r t here.
For 100/200/220V,
i n s e r t here.
Figure 9.
POWER
SWITCH
