< PO_BASIC_OP_PMR >
3
BASIC OPERATION
SWITCHING POWER ON/ OFF
Key type:
Press
[ ]
to switch the transceiver ON.
Press
[ ]
again to switch the transceiver OFF.
Knob type:
Turn the
[Power switch/ Volume control]
clockwise to switch the transceiver ON.
Turn the
[Power switch/ Volume control]
counterclockwise fully to switch the transceiver OFF.
ADJUSTING THE VOLUME
Key type:
Press the
key programmed as
[Volume Up]
to increase the volume. Press the
key programmed as
[Volume Down]
to
decrease the volume.
Knob type:
Rotate the
[Power switch/ Volume control]
to adjust the volume. Clockwise increases the volume and counterclockwise
decreases it.
SELECTING THE ZONE AND CHANNEL
Select the desired zone and channel using the keys programmed as
[Zone Up]
/
[Zone Down]
and
[Channel Up]
/
[Channel Down]
.
TRANSMITTING
1
Select the desired zone and channel.
2
Press the key programmed as
[Monitor]
or
[Squelch Off]
to check whether or not the channel is free.
•
If the channel is busy, wait until it becomes free.
3
Press the
PTT
switch and speak into the microphone. Release the
PTT
switch to receive.
•
For best sound quality at the receiving station, hold the microphone approximately 3 cm to 4 cm (1.5 inches) from your mouth.
RECEIVING
Select the desired zone and channel. If signaling has been programmed on the selected channel, you will hear a call only if
the received signal matches your transceiver settings.
