Kenwood NX-5800, Service Manual

Page: 71 / 150

(No.RA017<Rev.003>)1-71
 P25 Phase1 signaling
 P25 Phase2 signaling
 NXDN Mode signaling
RAN: Radio Access Number
PN9: Pseudo-Random Pattern
No.7, 9 Item: PC test mode only
4.13 Panel Tuning Mode
4.13.1 Transceiver tuning (To enter tuning mode)
To enter tuning mode, press the [ ] key while the transceiver
is in test mode. Use the [ ] key to write tuning data through tun-
ing modes, and the [

]/[

] key to adjust tuning requirements
(1 to 4096 appears on the LCD).
Use the [ ] key to select the adjustment item through tuning
modes. Use the [
] key to adjust 4, 6 or 8 reference level ad-
justments, and use the [

] key to switch between Wide5k/
Wide4k/Narrow.
• LCD display in panel tuning mode
14 None Single Tone Encode
(1000Hz)
15 None MSK PN9
16 MSK Decode MSK Encode
No. RX TX
1 NAC 293 NAC 293
2 NAC 023 NAC 023
3 NAC 5EA NAC 5EA
4 None PN9
5 NAC 293 Symbol Rate Pattern
6 NAC 293 1/3 Deviation Pattern
7 NAC 293 0 Continuous Pattern
8 NAC 293 Fidelity Pattern
9 None FSW+PN9
10 None 1011Hz Tone Test Pattern
11 Tone Pattern 1011Hz Tone Test Pattern
12 Silence Pattern Silence Pattern
13 Audio Test Pattern Audio Test Pat-
tern
14 Vocoder Loop None
No. RX TX
1 STTP-OB-1031-0 STTP-IB1031-1+Audio
2 None PN9 Phase2
3 STTP-OB-1031-1 Symbol Rate Pattern
Phase2
4 STTP-OB-1031-1 1/3 Deviation Pattern
Phase2
5 STTP-OB-1031-1 0 Continuous Pattern
6 STTP-OB-1031-1 0 Burst Pattern
7 STTP-OB-1031 Symmetrical
STTP-IB1031-1
8 Tone Pattern (Half rate) STTP-IB1031-1
9 Silence Pattern
(Half Rate) STP-IB-1 +
Silence Pattern (Half Rate)
10 Audio Test Pattern
(Half Rate) STTP-IB1031-1 + Audio
Test Pattern (Half Rate)
11 Codec Loop STTP-IB1031-1 + Codec
Loop
12 Vocoder Loop
(Half Rate) STTP-IB1031-1 +
Vocoder Loop (Half Rate)
No. RX TX
No. RX TX
1 RAN1 RAN1
2 None PN9
3 RAN1 Maximum Deviation
Pattern
7 FSW + PN9 FSW + PN9
9 Tone Pattern (1031Hz) Tone Pattern (1031Hz)
An RAST 256
2.6
CV voltage, AD value, etc
Sub LCD
display
Low1
Adjustment point
Main LCD
display
Adjustment value
(1~4096)
Proper value guide
(When the frequency
adjustment is necessary,
or is displayed.)
Adjustment item
An: Analog narrow mode
As: Analog wide 4k mode
Aw: Analog wide mode
P1: P25 Phase1 mode
P2: P25 Phase2 mode
Nn: NXDN narrow mode
Nv: NXDN very narrow mode
Low1
Low2
Low3
Low4
Low5
Low6
Center1
Center2
Center3 Center4
Center5
High1
High2
High3
High4
High5
High6