RadioPro IP Gateway
Installation and Configuration Guide NEXEDGE NX-57xx/58xx
8
2.
Configure NXDN and FleetSync System
a.
Expand the
Personal
folder, expand the
System 1
folder under that, and then select
System
Information
.
b.
In the System Information window, for System Type select
NXDN Conventional
, and for Signaling
Type select
FleetSync
.
c.
In the
ID (FleetSync)
box, enter a value for
Fleet (Own)
and
ID (Own)
.
(Note: These parameters do not have to be used elsewhere, but they must have an assigned value even if
the radio is being used in analog mode without FleetSync, or in digital mode with NXDN. Not entering an
ID will prevent RadioPro from functioning properly.)
d.
In the
Unit ID
box, enter a value for
Unit ID
.
(Note: This parameter does not have to be used elsewhere, but it must have an assigned value even if the
radio is being used in analog mode without FleetSync. Not entering an ID will prevent RadioPro from
functioning properly.)
