10
SELECTING A ZONE AND CHANNEL/GROUP ID
Select the desired zone using the key programmed as
[Zone
Up] / [Zone Down]
. Each zone contains a group of channels.
Select the desired channel/group ID using the Selector knob
(default). Each channel/group ID is programmed with settings
for transmitting and receiving.
• You can toggle the display between the zone and channel/group
ID names and number by pressing the key programmed as Display
Format, or by accessing the Menu {Page12}.
Note:
If the default settings for
/
and the Selector knob
have been changed, use the appropriate keys to select the zone and
channel/group ID.
TRANSMITTING
1
Select the desired zone and channel/group ID.
2
Press the key programmed as
[Monitor]
or
[Squelch O
ff
]
to
check whether or not the channel is free.
• If the channel is busy, wait until it becomes free.
3
Press
the
PTT
switch and speak into the microphone.
Release the
PTT
switch to receive.
• For best sound quality, hold the transceiver approximately
1.5 inches (3 ~ 4 cm) from your mouth.
■
Making Group Calls
(
Digital
)
If a key has been programmed with
[Group], [Group +
SDM],
or
[Group + Status]
, you can select a group ID from
the list to make a call to those parties on a Conventional
channel.
To select a group ID:
1
Press the key programmed as
[Group],
[Group + SDM],
or
[Group + Status]
.
2
Press /
to select a group ID/name from the list.
3
Press and hold the
PTT
switch to make the call.
• Speak into the transceiver as you would during a normal
transmission.
