Kenwood multipro FP720 series, Instructions Manual, Page: 9 / 76

To use the large feed tube - use both pushers together.
5 Put the food in the feed tube.
6 Switch on and push down evenly with the pusher -
never
put your fingers in the feed tube.
hints
●
Use fresh ingredients
● Don’t cut food too small. Fill the width of the large feed tube
fairly full. This prevents the food from slipping sideways
during processing. Alternatively use the small feed tube.
●
When using the chipper disc, place ingredients horizontally.
●
When slicing or shredding: food placed upright comes
out shorter than food placed horizontally .
●
There will always be a small amount of waste on the plate or
in the bowl after processing.
citrus press
Use the citrus press to
squeeze the juice from
citrus fruits (eg oranges,
lemons, limes and
grapefruits).
햲
cone
햳
sieve
to use the citrus
press
1 Fit the drive shaft and bowl
onto the power unit.
2 Fit the sieve into the bowl -
ensuring the sieve handle is
locked into position directly
over the bowl handle
.
3 Place the cone over the
drive shaft turning until it drops all the way down .
4 Cut the fruit in half. Then switch on and press the fruit onto
the cone.
● The citrus press will not operate if the sieve is
not locked correctly.
mill
Use the mill for milling herbs, nuts and
coffee beans.
햲
blade unit
햳
sealing ring
햴
jar
햵
mill lid
safety
● Never fit the blade unit to your machine
without the jar fitted.
●
Never unscrew the jar while the mill is
fitted to your machine.
●
Don’t touch the sharp blades. Keep the
blade unit away from children.
● Never remove the mill until the blades have
completely stopped.
important
●
To ensure long life of your mill, never run for
longer than 30 seconds. Switch off as soon as
you’ve got the right consistency.
● Don’t process spices - they may damage the
plastic.
●
The machine won’t work if the mill is fitted
incorrectly.
●
Use for dry ingredients only.
to use your mill
1 Put your ingredients into the jar.
Fill it no more than half full.
2 Fit the sealing ring into the blade
unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades
down.
4 Screw the blade unit onto the jar
until it is finger tight.
5 Place the mill onto the power unit
and turn to lock .
6 Switch on to maximum speed or use the pulse control.
hints
● Herbs are best milled when clean and dry.
7
m
ulti
pro
m
ulti
pro
m
ulti
pro
햲
햳
햲
햳
햴
햵
m ulti
pro