Kenwood multipro FP720 series, Instructions Manual, Page: 4 / 76

safety
●
Read these instructions carefully and retain for future reference.
●
Remove all packaging and any labels.
●
The blades and discs are very sharp, handle with care.
Always hold the knife blade by the finger grip
at the top, away from the cutting edge, both when
handling and cleaning.
●
Do not lift or carry the processor by the handle - or the handle may break
resulting in injury.
●
Always remove the knife blade before pouring contents from the bowl.
●
Keep hands and utensils out of the processor bowl and liquidiser jug
whilst connected to the power supply.
●
Switch off and unplug:
● ●
before fitting or removing parts
● ●
after use
● ●
before cleaning
●
Never use your fingers to push food down the feed tube. Always use the
pusher/s supplied.
●
Before removing the lid from the bowl or liquidiser/mill from the power
unit:-
● ●
switch off;
● ●
wait until the attachment/blades have completely stopped;
● ●
be careful not to unscrew the liquidiser jug or mill from the blade unit.
●
Allow all liquids to cool to room temperature before placing them in the
liquidiser.
●
Do not use the lid to operate the processor, always use the on/off speed
control.
●
This machine will be damaged and may cause injury if the
interlock mechanism is subjected to excessive force.
●
Never use an unauthorised attachment.
●
Never leave the machine on unattended.
●
Never use a damaged machine. Get it checked or repaired: see ‘service
and customer care’.
●
Never let the power unit, cord or plug get wet.
●
Don’t let excess cord hang over the edge of a table or worktop or touch
hot surfaces.
●
Do not exceed the maximum capacities stated.
●
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe
way and if they understand the hazards involved.
2