Starting the automatic station search again
• Press the
MENU
button to retrieve the DAB menu.
“
FULL SCAN
” will show on the display. Start the search with the
Enter
button.
• During the search the display will show the number of stations found so far.
• If no stations are found during the search, then
“NO DAB”
will be displayed for approx
.
2 seconds
and then change to the display
“FULL SCAN”
.
Please then check that the antenna is connected correctly or try to find a different position- for the
device to achieve a better reception.
Manual tuning of ensembles
• Press the
MENU
button to retrieve the DAB menu.
• Press the
TUN+
button until
“MANUAL”
shows in the display.
• Using the
Enter
button, the function is confirmed and the display will show the station which is
currently set with the corresponding frequency.
• Press the
TUN+
or
TUN-
buttons to manually select another channel.
• Confirm selection using the
Enter
button. Then the signal level will be shown in the display,
another press of the button will load the current ensemble.
Selecting a DAB+ station
The stations saved alphabetically in the stations list can be retrieved as follows:
• Press the
TUN+
or
TUN-
buttons on the remote control to scroll backwards or forwards in the
stations list.
• When you have selected the desired station, press the
Enter
button on the remote control or
wait 2 seconds for the playback to start.
“LOADING”
appears in the display.
• If the reception level for the selected station is not sufficient for trouble-free playback,
then
”OFF AIR”
will appear in the display. Please then select a different station.
Saving stations in station memory
There are 20 memory spaces available to make it easier to find DAB stations. To assign the memory,
proceed as follows:
• Select a station to be saved
• Press the
PRG
button until the display flashes and shows a memory space. An empty memory
space is indicated by
“EMPTY”
, an assigned space is shown with its frequency. You can also
re-assign a memory space which is already in use.
• Press the
TUN+
or
TUN-
buttons to select a memory space.
• Confirm save using the
Enter
button.
“STORED”
flashes briefly on the display.
• The stations can now be selected with the or
buttons.
13
