Kenwood KVT-817DVD - Excelon - DVD Player Instruction Manual Download Page 109 | Manualshive

Page: 109 / 112

background image

English

|

109

2

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product
safety.

Kenwood CORPORATION
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI
TOKYO, JAPAN

Kenwood CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS N0.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.

Location : Bottom Panel

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or modification is made.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE

This Class B digital apparatus complies with Canadian ICES-003.

is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other

limited viewing uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories.
"Dolby", "ProLogic", and the double-D symbol are trademarks of Dolby Laboratories.

"DTS", and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc.

is a trademark of SRS Labs, Inc.

B64-3171-00̲00̲K̲En.indd 109

B64-3171-00̲00̲K̲En.indd 109

05.5.25 2:03:47 PM

05.5.25 2:03:47 PM

«
...
107
108
109
110
111
...
»

Summary of Contents for KVT-817DVD - Excelon - DVD Player

















































































































Reviews:

No comments

Related manuals for KVT-817DVD - Excelon - DVD Player

Brand: Icom Pages: 26

Brand: Teac Pages: 20

Brand: Yamaha Pages: 10

SCD 3390 RDS Challenge 600 CD

Brand: Grundig Pages: 28

Brand: Stabila Pages: 10

Pocket Receiver 912T

Brand: ASCOM Pages: 2

Yellobrik ORX 1400

Brand: Lynx Pages: 2

Brand: Denon Pages: 14

Brand: Strong Pages: 20

Brand: IDS Pages: 2

Brand: Yaesu Pages: 32

Brand: Icom Pages: 20

FTDX5000D HF - PRODUCT REVIEW 12-2010

Brand: Yaesu Pages: 6

AIR-EAGLE XLT 44P-8-ESTOP

Brand: BWI Eagle Pages: 3

Brand: R.L.DRAKE Pages: 46

Brand: LVSUN Pages: 7

Brand: TV Star Pages: 68

Brand: TURBO RACING Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands