Settings
Changing between auxiliary connection and FM transmission
You can choose how your KTC-500DAB is connected to your vehicle's audio system.
1. Press
.
2. Turn and press the Select dial to choose 'SETTINGS' > 'AUDIO OUT'.
3. Turn and press the Select dial to choose how to connect your KTC-500DAB to your vehicle.
•
If you've connected your KTC-500DAB with an auxiliary cable, choose ‘LINE OUT’. Then turn and press the Select dial to
choose a gain setting of 'LOW' or 'NORMAL'. If the audio sounds distorted, choose 'LOW'.
•
If you're connecting your KTC-500DAB over FM radio, choose ‘FM TRANSMIT' and then choose an FM frequency. Ensure
a radio station isn't using the frequency you choose.
Setting your KTC-500DAB to enter standby automatically
By default, your KTC-500DAB enters standby after 4 hours, but you can change the delay.
1. Press
.
2. Turn and press the Select dial to choose 'SETTINGS' > 'AUTO STANDBY'.
3. Turn and press the Select dial to choose a delay between 1 and 8 hours.
Radio settings
Performing an autotune
If you can't find any digital radio stations, try retuning your KTC-500DAB.
l
To perform an autotune, press and hold the Select dial when you are in digital radio mode.
16
