background image

20

 EN

ENGLISH

Recording audio (analog sources)

Recording a music source

1

Use the INPUT SELECTOR knob to select the source (other than
“MD/TAPE”) you want to record.

2

Set the MD or TAPE recorder to record.

3

Start playback, then start recording.

Recording video

1

Use the INPUT SELECTOR knob to select the video source (other
than “VIDEO1”) you want to record.

2

Set the video deck connected to VIDEO 1 to record.

• Select the REC MODE to record a digital input source.

3

Start playback, then start recording.

• Recording may not be normal for some video software. This is due to

the copy guard condition.

°

Recording audio (digital sources)

Switch on the 

REC mode 

 to record a digital input source.

Usually use the 

A-REC

 

(Auto-Record) mode

 to record audio input

sources. When the digital mode changes during recording in the 

A-REC

mode

, the audio input source may be interrupted momentarily.

Recording music in A-REC or M-REC mode

INPUT SELECTOR

DIMMER

1

Use the INPUT SELECTOR knob to select the source (CD/DVD,
DVD/6CH or VIDEO2) you want to record.

2

Set the MD or TAPE recorder to record.

INPUT SELECTOR

Recording

3

Press and hold the DIMMER key for more than 2 seconds to select
the A-REC or M-REC mode during digital input.

1

 Rec mode off :

The digital input record mode is switched off.

2

 A-REC mode

:

The digital input signals (DTS, Dolby Digital,
or PCM) are identified automatically and
converted into stereo signals that are ready
for recording.

3

 M-REC mode

:

The input signal type at the moment this
mode is selected is held throughout this
mode.

• When the 

M-REC mode

  is selected, the digital input signal is

converted to stereo signals (down-mix). But once the digital signal
is chaned to other signal, no signal is output.
When the

 A-REC mode

  is selected, the digital input signal is

converted to stereo signals even if the digital signal is changed.

For A-REC mode:

For M-REC mode:

4

Start playback, then start recording.

• If the audio reproduction stops in the middle due to change in the

input signals, etc., press the 

DIMMER

 key.

*5440/15-23/1EN

04.1.27, 8:22 PM

20

Summary of Contents for KRF-V6080D









































Reviews: