17
EN
ENGLISH
Preparing for surround sound
6
Input the distance to the speakers.
1
Select the DISTANCE from the setup displays and press the
SETUP key again.
2
Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left speaker (L)
: ____ feet (meters)
Distance to Center speaker (C)
: ____ feet (meters)
Distance to Front Right speaker (R)
: ____ feet (meters)
Distance to Surround Right (RS)
: ____ feet (meters)
Distance to Surround Back Right (RB): ____ feet (meters)
Distance to Surround Back (BS)
: ____ feet (meters)
Distance to Surround Back Left (LB) : ____ feet (meters)
Distance to Surround Left (LS)
: ____ feet (meters)
Distance to Subwoofer (SW)
: ____ feet (meters)
• If you have selected “SPEAKER” as the Surround Back setting,
“RB” and “LB” are not appeared but “BS” is appeared on the
Display.
3
Use the MULTI CONTROL knob or Multi
%
/
fi
keys to select the
distance to the front speakers.
Indication in feet
Indication in meters
• The allowable setting range is 1 to 30 feet (0.3m to 9.0m),
adjustable in 1 foot (0.3m) increments.
4
Press the SETUP key to accept the settings.
5
Repeat steps
3
and
4
to input the distance for each of the
speakers.
7
Adjust the LFE LEVEL (Low Frequency Effects level)
1
Select the LFE LEVEL from the setup displays and press the
SETUP key again.
2
Use the MULTI CONTROL knob or Multi
%
/
fi
keys to adjust
the LFE LEVEL.
• The LFE LEVEL is adjusted from OdB to -10dB in 1dB step
decrements.
3
Press the SETUP key to accept the setting.
4
Setup is complete when the EXIT indication appears.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
5
Press the SETUP key to exit the SETUP mode.
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator
will blink to indicate the source signal. Adjust the input level.
1
Use the INPUT SELECTOR knob to select the source of which the
input level you want to adjust.
• You can store a separate input level for each input source.
2
Press the SOUND key repeatedly until the “INPUT” indication
appears.
3
Use the MULTI CONTROL knob or Multi
%
/
fi
keys to adjust the
input level.
• The input level may be adjusted to any one of three settings: 0dB,
-3dB, and -6dB. (The initial setting is 0dB.)
4
Press the SOUND key again to return to the input indication.
*5440/15-23/1EN
04.1.27, 8:22 PM
17
