Kenwood KRC-708 Instruction Manual Download | Manualshive

Page: 7 / 49

background image

— 7 —

Function of the KRC-X858

"Bass EXT" : Switch the Bass Extend mode on/off.

Setting values: ON / OFF

(When the bass extend mode is set to on, low
frequency response is extended by 20%.)

This mode is available only when the Sound coordinate system is
on. (page36)

NOTE

Function of the KRC-X858

"Bass Q" : Adjust the Bass quality factor.

Setting values: 1.00 / 1.25 / 1.50 / 2.00

This mode is available only when the Sound coordinate system is
on. (page36)

NOTE

"Bass" : Adjust the bass level.

Setting values: - 8 – + 8

Function of the KRC-X858

"Bass F" : Adjust the center frequency of the bass.

Setting values: 60 / 70 / 80 / 100 (Only when the bass quality
factor is set to 1.00, 1.25 or 1.50) / 150 (Only when the bass
quality factor is set to 2.00) Hz

This mode is available only when the Sound coordinate system is
on. (page36)

NOTE

"Kex"/"ec4"/"dB" : Recalling the kenwood preset sound setting

Press the preset buttons (#1-6).
Settings: #1;Flat, #2;Rock, #3;Pops/Top40, #4;Jazz, #5;Easy,

#6;Scan of #1-5

• This mode is available only when the Sound coordinate system

is on. (page36)

• You can call the following settings with this function; bass

center frequency, bass level, bass quality factor, bass
extension, treble center frequency, and treble level setting.
Their setting values are different depending on the setting of
the mobile preset plan mode.

NOTE

Adjust various parameters of sound quality.

Press the AUD button to enter the control mode.

Selecting mode

Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change.
Please refer to the following for the contents of the
adjustment modes.

Source tone memory

Each source ( tape, CD, FM, AM and disc changer ) has its own
memory in which to store the bass, treble and N-F level settings.
The settings made for a particular source are recalled
automatically whenever you use that source ( for example, FM
mode uses the tone settings made for FM, AM for AM, etc.).

Adjust each mode

Press the

4

/

¢

button.

Please refer to the following for the adjusting values.

Press the AUD button to end the control mode.

4

3

NOTE

2

1

Audio Control Setting

KRC-X858_U.S-4 00.12.27 0:12 PM Page 7

«
...
5
6
7
8
9
...
»

Summary of Contents for KRC-708


















































Reviews:

No comments

Related manuals for KRC-708

Brand: FAAC Pages: 2

Brand: Javad Pages: 10

Brand: Jensen Pages: 6

Brand: Jensen Pages: 4

VM9213 - Touch Screen MultiMedia Receiver

Brand: Jensen Pages: 88

Phase Linear CD1213

Brand: Jensen Pages: 46

Brand: Jensen Pages: 4

Brand: Jensen Pages: 31

Brand: Jensen Pages: 4

Brand: Jensen Pages: 2

Brand: Jensen Pages: 48

Brand: Panasonic Pages: 89

Portable CD Player

Brand: Jensen Pages: 12

HD-PLC DA-PU100

Brand: Panasonic Pages: 16

C-Tech HD 6600 SST

Brand: Clarke-tech Pages: 32

Brand: SereneLife Pages: 2

Brand: Audiovox Pages: 44

VALUE LINE LR 26 R

Brand: Wisi Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands