Kenwood KRC-708 Instruction Manual Download | Manualshive

Page: 33 / 49

background image

Tune to a RDS station and receive the signal for several
minutes.
The clock will adjust automatically to the local time.

The clock will not adjust automatically if the RDS station tuned to
is not transmitting time data. In such a case, try another RDS
station.

NOTE

— 33 —

Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
The factory default for this function is ON.

Display and setting:

"CRSC ON" : The CRSC is on.
"CRSC OFF" : The CRSC is off.

Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned on. In such a
situation, turn it off.

NOTE

Clean Reception System Circuit (CRSC)

Switching to a Different Traffic Information Station:

Use the

4

/

¢

buttons to make an auto seek of the TI

stations in a certain band.

• When you are listening to a tape or disc, you cannot change to

another TI station.

• When you turn on the TI function, the motorized antenna will

extend automatically.

NOTE

Function of the KRC-X858

You can listen to traffic information. If you are listening to
tapes or discs, they will continue playing until a traffic bulletin
is broadcast.

Display and setting:

"TI ON" : The Traffic Information function is on.

When the function is on, the TI indicator is turned on.
When a traffic bulletin begins to be broadcast,
"TRAFFIC" will be displayed.
If you are listening to a tape or disc when a traffic
bulletin begins, they will automatically be turned off.
When the bulletin ends or poor reception is
experienced, the tape or disc will begin playing again.

"TI OFF" : The Traffic Information function is off.

Traffic Information Function

By pressing the button hidden behind the upper left part of the
faceplate during forced closing, you can open the faceplate.
Follow the directions below to preset the number of times that
this button needs to be pressed in order to open the faceplate.

Display and setting:

"OPEN SW 1" – "OPEN SW 3"

The initial setting value is "1" .

NOTE

Manual Open Button Setting

This function permits the CD text, MD title, Radio text, and
Calender function to be scrolled and the entire text to be
displayed. Switching between manual scrolling and automatic
scrolling is permitted. The factory default is automatic
scrolling.

Display and setting:

"Scroll Auto" : Automatic scrolling
"Scroll Manu" : Manual scrolling

Text Scroll

KRC-X858_U.S-4 00.12.27 0:13 PM Page 33

«
...
31
32
33
34
35
...
»

Summary of Contents for KRC-708


















































Reviews:

No comments

Related manuals for KRC-708

Brand: Xantech Pages: 4

Brand: Sangean Pages: 6

Gewa Andromeda REC4

Brand: Abilia Pages: 48

8751A SIGNAL PROCESSING

Brand: Altec Lansing Pages: 17

Brand: Sangean Pages: 52

Brand: Uni-Art Precise Pages: 8

ATLONA HDR-EX-70-2PS

Brand: Panduit Pages: 12

Brand: TV Star Pages: 68

Brand: Boss Audio Systems Pages: 30

Brand: Tele System Pages: 24

UM-XSW-D0-LEN-V03-01

Brand: Swisson Pages: 16

Brand: dB Technologies Pages: 2

mannesmann 79RC600/00

Brand: VDO Pages: 6

Brand: Fujitsu Pages: 44

Brand: Fujitsu Pages: 6

Brand: Fujitsu Pages: 124

Brand: Fujitsu Pages: 134

Brand: Fujitsu Pages: 240

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands