Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
•
When the AF function is turned on w hilst auto memory entry
takes place, only RDS stations (i.e., stations w ith RDS
capability) are stored. RDS stations that have been preset for
FM 1 cannot also be preset in FM 2 or FM 3.
•
When the local seek function is turned w hilst auto memory
entry takes place, stations w ith poor reception are not stored.
•
When the Traffic Information function is on , only the local
traffic information station frequency w ill be stored.
Cancelling Auto M emory Entry During Its Operation:
Press the M ENU button w hilst auto memory entry is taking
place to stop the process.
N OTE
Sw it ching D isplay f or Tuner (non-RD S st at ion)
Sw itching the Display:
Each time you press the DISP button, the display sw itches
betw een the frequency and Clock.
•
When the sw itching clock display (P.31) is set to off, the display
w ill not sw itch to the clock display.
•
The
£
indicator lights w hilst the clock is displayed.
N OTE
D irect A ccess Tuning
When you already know the frequency of the station that you
w ant to listen to, you can enter it directly for quick access.
(Function of remote control)
Select the band by pressing the FM or AM button.
Press the DIRECT button.
The frequency part of the display blinks for 10 seconds.
If you make no input in the 10-second period, direct access
tuning is automatically cancelled.
Enter the frequency of the desired station w hilst the display is
blinking.
If you w ant to listen to an FM station at 92.1 M Hz, for
example, press 0, 9, 2, and 1.
If you w ant to listen to an AM station at 810 kHz, for example,
press 0, 8, 1, and 0.
3
2
1
Function of rem ote control w ith num ber/letter entry buttons
(See page 8)
•
When a frequency w hich cannot be received is input, this
frequency is not verified and operation returns to the original
frequency input mode.
•
FM frequencies can only be input in 0.1 M Hz steps, and not in
0.01 steps.
Cancelling Direct Access Tuning:
Press the DIRECT button again.
N OTE
— 13 —
http://www.usersmanualguide.com/
