32
|
KOS-A210
Installation
Installation of Controller
1
According to the installation angle of the controller,
install Spacer (Accessory
5
) to Bracket (Accessory
6
) as described below.
When installing on the 0-degree surface
Accessory
8
(Ø2 X 10, Black)
8
8
Accessory
6
Accessory
5
When installing on the 4-degree surface
Accessory
0
(Ø2 X 5, Black)
0
0
Accessory
6
Accessory
5
When installing on the 8-degree surface
Accessory
7
(Ø2 X 11.5, Blue)
7
9
Accessory
9
(Ø2 X 9, White)
Accessory
6
Accessory
5
⁄
•
The direct installation of Bracket (Accessory
6
) without
Spacer (Accessory
5
) is also possible.
2
From Spacer (Accessory
5
), remove the chip in the
direction where you want to wire the controller
cable.
Accessory
5
Chip
Break off the spacer chip in the direction where you
want to wire the controller cable.
Drill a hole of 10 mm in diameter on the mounting
surface when not using spacer or wiring the cable
behind the mounting surface.
B64-4455-00̲00̲KOS-A210̲E.indd 32
B64-4455-00̲00̲KOS-A210̲E.indd 32
09.2.18 2:28:02 PM
09.2.18 2:28:02 PM
130.com.ua
Autogood products internet store http://130.com.ua
