![background image](http://html.mh-extra.com/html/kenwood/kna-dv3100/kna-dv3100_installation-manual_188319006.webp)
Connection
PRK SW
S SENS
Wiring harness
G
Parking sensor wire (Green)
To parking brake detection switch harness of car
Car speed signal intermediate wire
H
(White)
To the car speed signal harness
For the sake of safety, be sure to
connect the parking sensor wire.
2
WARNING
Car speed signal wire (White)
D
S SENS
Remote Control Sensor
accompanying the Remote
Control
Audio Output (MONO) (Black)
Visual Output (Yellow)
6
-
English
(3A)
(5A)
• Do not cut off the holder marked "S SENS" (containing a
protection diode) of the car speed signal detection wire
H
(White). Doing so will cause a fault with the car.
• Please contact your dealer for information about the connection
method. A connection error will lead to car breakdown.
2
WARNING
When disconnecting the interface cable, pinch and pull
the ring of the connector. If you pull other parts of the
connector, the locking mechanism of the connector is
not released, which may damage the connector.
2
CAUTION
I/F Cable
I
To the monitor unit
("NAV I/F" terminal)
Voice control microphone (Optional)
Do not remove the cap when
not connecting the cable.
NOTE
KNA-DV3100Inst(K)_En 03.5.8 10:06 AM Page 6