18
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Bluetooth®
[INITIALIZE]
[YES]
: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ;
[NO]
: Cancels.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold .
“PLEASE PAIR YOUR PHONE PIN 0000” appears on the display.
2
Search and select the name of your receiver (“KMM-BT306”) on the
Bluetooth device.
3
Operate the Bluetooth device to confirm pairing.
“TESTING” flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing
status
HF CNT:
Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL:
Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold
B
SRC to turn off the unit.
Bluetooth mode settings
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[BT MODE]
[PHONE SELECT]
Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
• You can connect a maximum of two Bluetooth phones and one
Bluetooth audio device at a time.
[AUDIO SELECT]
[DEVICE DELETE]
1
Turn the volume knob to select a device to delete, then press the
knob.
2
Turn the volume knob to select
[YES]
or
[NO]
, then press the knob.
[PIN CODE EDIT]
(0000)
Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2
Press
S
/
T
to move the entry position.
Repeat step 1 and step 2 until you finish entering the PIN code.
3
Press the volume knob to confirm.
[RECONNECT]
[ON]
: The unit is automatically reconnect when the last connected
Bluetooth device is within the connectable range. ;
[OFF]
: Cancels.
[AUTO PAIRING]
[ON]
: The unit is automatically paired with the supported Bluetooth
device (iPhone/iPod touch) when it is connected through USB input
terminal. Depending on the operating system of the connected device,
this function may not work. ;
[OFF]
: Cancels.
JS_KWD_KMM_BT306_MN_EN.indd 18
JS_KWD_KMM_BT306_MN_EN.indd 18
6/3/2019 2:52:34 PM
6/3/2019 2:52:34 PM
