30
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Part list for installation
(A)
Faceplate (×1)
(B)
Trim plate (×1)
(C)
Mounting sleeve (×1)
(D)
Wiring harness (×1)
(E)
Extraction key (×2)
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
terminal of
the car battery.
2
Connect the wires properly.
See “Wiring connection” on page 31.
3
Install the unit to your car.
See the following “Installing the unit (in-dash mounting)”.
4
Connect
the terminal of the car battery.
5
Press
B
SRC to turn on the power.
6
Detach the faceplate and reset the unit within 5 seconds. (Page 3)
Removing the unit
1
Detach the faceplate.
2
Remove the trim plate.
3
Insert the extraction keys deeply into the slots on
each side, then follow the arrows as shown on
the illustration.
Do the required wiring.
(Page 31)
Bend the appropriate tabs to hold the
sleeve firmly in place.
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
Dashboard of your car
Installing the unit (in-dash mounting)
INSTALLATION/CONNECTION
JS_KWD_KMM_BT305_EN_3rd Draft.indd 30
JS_KWD_KMM_BT305_EN_3rd Draft.indd 30
8/16/2018 5:06:23 PM
8/16/2018 5:06:23 PM
