14
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BLUETOOTH®
(for
/
)
To
On the faceplate
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Press
.
Reject another incoming
call
Press
.
While having two active calls...
End current call and
activate held call
Press
.
Swap between the
current call and held call
Press
.
Adjust the phone volume
[00]
to
[35]
(Default:
[15]
)
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.
Switch between hands-free
and private talk modes
Press
during a call.
• Operations may vary according to the
connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN
–10
to
+10
(
–4
): The sensitivity of the microphone increases as the
number increased.
NR LEVEL
–5
to
+5
(
0
): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL
–5
to
+5
(
0
): Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
SETTINGS
AUTO ANSWER
1
to
30
: The unit answers incoming call automatically in the selected
time (in seconds). ;
OFF
: Cancels.
BATT/SIGNAL*
(For
)
AUTO
: Shows the strength of the battery and signal when the unit
detects a Bluetooth device and the Bluetooth device is connected. ;
OFF
: Cancels.
*
Functionality depends on the type of the phone used.
JS_KWD_KMM_BT304_ENE2N_EN_3.indd 14
JS_KWD_KMM_BT304_ENE2N_EN_3.indd 14
8/7/2017 9:48:27 AM
8/7/2017 9:48:27 AM
