14
KDC-MP828/W7531/W7531Y/W8531
/W8531Y/X789/X8529/X889
●
Audio adjust mode
Model with DSP (KDC-MP828/X889)
• By pressing [AUD] key for less than 1 second, the Audio
Adjust mode is entered.
• As with the [AUD] key, [
∗
] key on the remote controller can
be used to enter the Audio Adjust mode.
• As for the adjustment items, items for both the AUDIO
FUNCTION MODE and SETUP MODE are included.
• The initial item will be Fader and the next is Balance. (After
Balance, it will be arbitrary.)
• With the remote controller, continuous forwarding is pro-
hibited.
• Using the VOL knob, the Fader is to be adjusted to the fol-
lowing 3 levels : R15
↔
0
↔
F15 (The default value : 0)
• Using the VOL knob, the Balance is to be adjusted to the
following 3 levels : L15
↔
0
↔
R15 (The default value : 0)
• Using the VOL knob, the Sub Woofer Level is to be ad-
justed to the following 3 levels : –15
↔
0
↔
+15 (The de-
fault value : 0)
• Using the VOL knob, the Volume Offset is to be adjusted to
the following 2 levels : –8
↔
0 (The default value : 0)
Model with no DSP (KDC-W7531/W7531Y/W8531/
W8531Y/X789/X8529)
• By pressing [AUD] key for less than 1 second, the audio
adjustment mode can be entered.
• Using the remote controller [
∗
] key and [AUD] key, the au-
dio adjustment mode can be entered.
• Adjustment items of both the AUDIO FUNCTION MODE
and SETUP MODE are included.
• The initial item will be Fader, which is followed by : Balance
Treble Level
→
(Sub Woofer
→
LPF Sub Woofer (Af-
ter this, it will be arbitrary)
• With the remote controller, continuous forwarding is pro-
• Using the VOL knob, the Fader can be adjusted in 3 steps :
• Using the VOL knob, the Balance can be adjusted in 3 steps
• Using the VOL knob, the Bass / Middle / Treble Level can
be adjusted in 3 steps : –8
↔
0
↔
+8 (The initial value is 0)
• Using the VOL knob, the Sub Woofer Level can be adjusted
in 3 steps : –15
↔
0
↔
+15 (The initial value is 0)
• Using the VOL knob, the Volume Offset can be adjusted in
2 steps : –8
↔
0 (The initial value is 0)
• Using the VOL knob, the HPF Front / Rear can be adjusted
in 2 steps : Through
↔
180Hz (or 220Hz) (The initial value
is Through)
• Using the VOL knob, the LPF Sub Woofer can be adjusted
in 2 steps : 60Hz (or 50Hz)
↔
Through (The initial value is
Through)
• Using the VOL knob, the Sub Woofer Phase can be ad-
justed in 2 steps : Reverse
↔
Normal (The initial value is
Normal)
• Using the VOL knob, the Volume Offset can be adjusted in
2 steps : –8
↔
0 (The initial value is 0)
• Using the VOL knob, the Loudness ON/OFF can be ad-
justed in 2 steps : OFF
↔
ON (The initial value is OFF)
• 2-Zone ON/OFF can be adjusted in 2 steps : OFF
↔
ON
(The initial value is OFF)
• Bass f / Bass Q / Bass EXT / Middle f / Middle Q / Treble f
do no appear in audio adjustments.
●
MENU items
• Push the [
] (NEXT) key for at least 1 second to enter the
MENU.
• The [DNPP/SBF] and [DIRECT] keys on the remote con-
troller can also be used to enter the MENU.
• With the remote controller, continuous forwarding is pro-
hibited.
• When a CD is used as a source, the default item will be the
ACD F/W Version.
●
2-ZONE (Dual Zone) items
• When using sources other than the STANDBY source, us-
ing a short-press on [AUTO] or [TI] key, 2-ZONE ON/OFF
is achieved.
●
Backup current measurement
When reset in Acc OFF (Back Up ON) condition, MUTE termi-
nal goes off after 2 seconds, instead of 15 seconds. (During
this time, the CD mechanism does not function.)
TEST MODE
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
