ENGLISH
17
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BLUETOOTH®
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (see the following table), then press
the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN
LEVEL –10
to
LEVEL +10
(
LEVEL –4
): The sensitivity of the microphone increases as
the number increased.
NR LEVEL
LEVEL –5
to
LEVEL +5
(
LEVEL 0
): Adjust the noise reduction level until the least noise
is being heard during a phone conversation.
ECHO CANCEL
LEVEL –5
to
LEVEL +5
(
LEVEL 0
): Adjust the echo cancellation delay time until the
least echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table), then press
the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
SETTINGS
AUTO ANSWER
1
to
30
: The unit answers incoming call automatically in the selected time (in seconds). ;
OFF
: Cancels.
BATTERY/
SIGNAL
*
AUTO
: Shows the strength of the battery and signal when the unit detects a Bluetooth
device and the Bluetooth device is connected. ;
OFF
: Cancels. Date is shown.
*
Functionality depends on the type of the phone used.
Make a call
You can make a call from the call history, phonebook, or
dialing the number. Call by voice is also possible if your
mobile phone has the feature.
1
Press
to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press
again
to switch to another phone.
“(Second device name)” appears.
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3
Repeat step
2
until the desired item is selected/
activated or follow the instructions stated on the
selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
CALL HISTORY
(Applicable only if the phone supports PBAP.)
1
Press the volume knob to select a name or a phone
number.
• “INCOMING”, “OUTGOING”, or “MISSED” is shown on
the lower part of the display to indicate the previous
call status.
•
Press
DISP
to change the display category
(NUMBER or NAME).
• “NO DATA” appears if there is no recorded call
history.
2
Press the volume knob to call.
JS_KWD_KDC_X7100DAB_XN_EN_3.indd 17
JS_KWD_KDC_X7100DAB_XN_EN_3.indd 17
12/14/2016 9:18:28 AM
12/14/2016 9:18:28 AM
