background image

English

   

|

   

13

Theft Deterrent Faceplate

The faceplate of the unit can be detached and 
taken with you, helping to deter theft.

Removing the Faceplate

Press the Release button.

The faceplate is unlocked, allowing you to detach 
it.

•   The faceplate is a precision piece of equipment and 

can be damaged by shocks or jolts. For that reason, 
keep the faceplate in its special storage case while 
detached.

•  Do not expose the faceplate or its storage case to 

direct sunlight or excessive heat or humidity. Also 
avoid places with too much dust or the possibility of 
water splashing.

Reattaching the Faceplate

1

  Align the shaft on the unit with the 

depression on the faceplate.

2

  Push the faceplate in until it clicks.

The faceplate is locked in place, allowing you to 
use the unit.

TEL Mute

The audio system automatically mutes when a 
call comes in.

When a call comes in

"CALL" is displayed.
The audio system pauses.

Listening to the audio during a call

Press the [SRC] button.

The "CALL" display disappears and the audio 
system comes back ON.

When the call ends

Hang up the phone.

The "CALL" display disappears and the audio 
system comes back ON.

B64-2977-00̲E̲English̲r0.Indd   13

B64-2977-00̲E̲English̲r0.Indd   13

04.11.16   3:59:54 PM

04.11.16   3:59:54 PM

Summary of Contents for KDC-W6031









































Reviews: