38
|
English
CD/Audio file/External disc control features
Disc Naming (DNPS)
Attaching a title to a CD.
1
Play the disc you want to attach a name to
• A title cannot be attached to MD or Audio file media.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Name set mode
Push the Control knob towards [
4
] or
[
¢
].
Select the "Name Set" display.
4
Enter Name set mode
Press the Control knob for at least 1 second.
5
Move the cursor to the enter character
position
Push the Control knob towards [
4
] or
[
¢
].
6
Select the character type
Press the Control knob.
Each time you press the knob, the character type
alternates between the types shown in the table
below.
Character type
Display
Alphabet upper case
"A-Z"
Alphabet lower case
"a-z"
Numbers and symbols
"1•*"
Special characters (Accent characters)
"ë"
7
Select the characters
Push the Control knob towards [FM] or [AM].
•
You can enter characters by using a remote control
with a number button.
Example: If you are entering "DANCE".
Character
Button
Times pressed
"D"
[3]
1
"A"
[2]
1
"N"
[6]
2
"C"
[2]
3
"E"
[3]
2
8
Repeat steps 5 through 7 and enter the name.
9
Exit Menu mode
Press the [MENU] button.
• When operation stops for 10 seconds the name at
that time is registered, and Menu mode closes.
• Media that you can attach a name to
- Internal CD player: 10 discs.
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• You can change the name of a CD by the same
operation you used to name it.
Text/Title Scroll
Scrolling the displayed CD text, Audio file text, or
MD title.
Push the Control knob toward [FM] for at
least 1 second.
B64-3091-00̲E̲English.Indd 38
B64-3091-00̲E̲English.Indd 38
05.4.5 1:13:10 PM
05.4.5 1:13:10 PM
