27
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
6
Remove the application film (tag III).
(F)
Do not touch the lead terminal of film antenna
(F)
.
7
Set the postion of the protrusion of the amplifier unit
(G)
with the
K
on the film antenna
(F)
and paste.
Do not touch the lead terminal or the pasting surface (adhesive side)
of the amplifier unit
(G)
.
•
When installing the antenna on the right side
(F)
(G)
•
When installing the antenna on the left side
(F)
(G)
8
Remove the film covering the earth sheet and paste the earth sheet
on the metal part of the vehicle.
Provide sufficient leeway for the earth sheet so that it does not
interfere with the interior parts (front pillar cover). Also take care that
the interior parts do not interfere with the amplifier unit
(G)
.
(G)
9
Wire the antenna cables.
Use
cable
clamper
(H)
to secure the antenna to the pillar at several
positions.
10
Attach the front pillar cover back to its original position.
Be sure not to damage the earth sheet and amplifier unit
(G)
when
covering.
11
Connect the amplifier unit
(G)
to the DAB input terminal on the rear
of the unit.
12
Set
[DAB ANT POWER]
to
[ON]
.
( 5)
Set the position of the protrusion with
J
mark
Earth sheet
Earth sheet
Windscreen
Front pillar cover
Application film (tag III)
Earth sheet
Set the position of the protrusion with
K
mark
Lead terminal of the film antenna
(F)
Lead contact of the amplifier unit
(metal part)
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 27
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 27
25/11/2013 5:17:27 PM
25/11/2013 5:17:27 PM
