Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
Speaker Setting
3rd section
[2] button
Adjustment Item Display
Range
Volume offset
"Volume Offset"
–8 — ±0
[3] button
Adjustment Item Display
Range
Non-Fading level
"NF Level"
–15 — +15
Non-Fading Phase "NF Phase"
Normal (0°)/Reverse (180°)
Volume offset: Each source's volume can be set as a difference
from the basic volume.
• TruBass: Assisting the playback for the super bass sound.
• FOCUS: Adjusts the sound image by changing the vertical position
of the speakers virtually.
• SRS: Making a natural 3D sound field.
• SRS cannot be set in tuner source.
2nd section
[2] button
Adjustment Item
Display
Range
Front High Pass Filter
"HPF Front"
Through/40/60/80/100/
120/150/180/220 Hz
Rear High Pass Filter
"HPF Rear"
Through/40/60/80/100/
120/150/180/220 Hz
[3] button
Adjustment Item
Display
Range
Non-Fading
"LPF NF"
50/80/120/Through Hz
Low Pass Filter
[4] button
Adjustment Item
Display
Range
Loudness
"Loudness"
ON/OFF
[5] button
Adjustment Item
Display
Range
WOW
"SRS WOW"
Low/High/OFF
TruBass
"SRS TruBass" ON/OFF
FOCUS
"FOCUS"
Low/High/OFF
SRS
"SRS"
ON/OFF
• Loudness: Compensating for low and high tones during low
volume.
• WOW: TruBass, FOCUS and SRS are all set to values shown
below.
WOW
TruBass
FOCUS
SRS
High
ON
High
ON
Low
ON
Low
ON
OFF
OFF
OFF
OFF
General features
— 12 —
English
KDC-9023R_U.S_r4.pg 02.12.9 6:02 PM Page 12
