Kenwood KDC-5057SD, Instruction Manual

Page: 60 / 82

60
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
General settings
12-5. Muting the audio upon
reception of a phone call
Function of KDC-5057SD
The audio system automatically mutes when it
receives an incoming call.
When a call comes in
“CALL” appears.
The audio system pauses.
Listening to the audio during a call
Press [SRC].
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
To use this function
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to
<Connecting wires to terminals> in
Quick start guide.
12-6. Demonstration mode setting
You can turn on/off the demonstration mode.
1
Press [Control] knob.
Enters the Function setting mode.
2
Select “DEMO Mode” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
3
Select a setting (“ON” or “OFF”) using [Control]
knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [
1
/
6
].