4
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
Set the initial settings
1
Press
SRC
to enter
[STANDBY]
.
2
Press the volume knob to enter
[FUNCTION]
.
3
Turn the volume knob to select
[INITIAL SET]
, then press the knob.
4
Turn the volume knob to make a selection (see the following table),
then press the knob.
5
Press and hold
to exit.
• To return to the previous hierarchy, press
.
Default:
XX
PRESET TYPE
NORM
: Memorizes one station for each preset button in each band (FM1/
FM2/ FM3/ AM). ;
MIX
: Memorizes one station for each preset button,
regardless of the selected band.
KEY BEEP
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
PANDORA SRC
ON
: Enables PANDORA in source selection. ;
OFF
: Disables.
(
➜
8)
BUILTIN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables.
(
➜
8)
CD READ
1
: Automatically distinguishes between audio file disc and audio CD. ;
2
: Forces to play as an audio CD. No sound can be heard if an audio file disc
is played.
SWITCH PRE
REAR
/
SUB-W
: Selects whether rear speakers are connected or a
subwoofer is connected to the line out terminals on the rear (through an
external amplifier).
SP SELECT
OFF
/
5/4
/
6 × 9/6
/
OEM
: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
F/W UPDATE
F/W UP xx.xx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not
activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
3
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL DEMO”
\
“PRESS”
\
“VOLUME KNOB”
1
Press the volume knob.
[YES]
is selected for the initial setup.
2
Press the volume knob again.
“DEMO
OFF”
appears.
Set the clock
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to make a selection (one at a time), then
press the knob.
Selection:
[SETTINGS]
,
[CLOCK]
,
[CLOCK ADJ]
Repeat
step
2
to make the next selection.
3
Turn the volume knob to adjust the clock, then press the knob.
Press
4
/
¢
to move between the hour and minute adjustment.
4
Press and hold
to exit.
(or)
Press and hold
SCRL DISP
to enter clock adjustment mode
directly while the clock time is displayed.
Then, perform step
3
above to set the clock.
1
2
EN_KDC-210U[K0]2.indd 4
EN_KDC-210U[K0]2.indd 4
4/25/13 11:56:24 AM
4/25/13 11:56:24 AM