4
KCA-S220A
7
Installing the switching unit on the carpet under a seat
•
Velcro strips are used to install the switching unit in a simple manner. To install the switching unit securely, use of self-
tapping screws is recommended.
•
Install the switching unit
!
in places that do not obstruct driving.
•
Install the switching unit
!
in places where it is not touched by the tip of the shoes of a rear seat passenger.
Route cables so that they are not caught in slide rails.
•
Do not install the unit in places where it is exposed to direct sunlight, high heat, or where water may splash over it.
•
Do not place anything on top of the switching unit
!
.
Installation
7
Installing the switching unit with a board in the trunk space
Connection
Self-tapping screw
$
(
φ
4
×
16 mm)
Switching unit
!
Board etc.
thickness: 17mm or more
1
Install the switching unit with self-tapping
screws
$
(
φ
4
×
16 mm).
Switching unit
!
Velcro strips
#
carpet
1
Remove the backing from the velcro strips
#
and attach it to the bottom of the switching
unit
!
. Install the switching unit on the
carpet.
KCA-S220A(W)̲all.indd Sec2:4
KCA-S220A(W)̲all.indd Sec2:4
06.4.5 1:46:43 PM
06.4.5 1:46:43 PM
