background image

10

GETTING STARTED

GETTING STARTED

Product Details

Camera Button

Antenna

Lens

Field of view: 125 degrees

Aperture: F/2.4

Jog Dial

Status LED

Phone Button

microSD Card Slot

Speaker and 
Microphone Port

DC Power 
Charging & 
Firmware Upgrade 
Port

Powering On and Off

Press the Jog Dial and the Phone Button for 1 second to power on. Tap the Jog 
Dial and the Phone Button to power off.
*  When the main unit is turned on, the camera turns on and video recording starts 

(

[

Auto Start Recording

]

).

Charging

The headset can be charged using many common methods via the supplied USB 
power & data cable. The LED turns red while the headset is charging and turns 
blue when it is fully charged. Depending upon the charging method, the headset 
will be fully charged in about 2.5 hours. The headset is compatible with 5 V input 
USB-charged devices only.

NOTE

•  Using When Plugged Into a Power Source (USB-charging adapter or Powerbank)

When you want to record long videos and time lapse events, connect the KCA-HX7C to 
a power source and then use it.

 

– If you connect the KCA-HX7C to the Powerbank while the camera is on, the KCA-

HX7C will use the electricity stored in the Powerbank but the battery will not charge. 

 

– If you connect the KCA-HX7C to the Powerbank while the camera is off, you can use 

the KCA-HX7C while it charges.

Summary of Contents for KCA-HX7C





































Reviews: