20
wash setting
first washing operation
Some water may be left in your machine due to tests carried out during production. To dispose of
this water, it is recommended to perform the first washing operation with the programme (Cotton
90ºC) and without laundry by inserting ½ portion of detergent in 2nd compartment of the detergent
drawer.
7. Press the
Start / Pause
button to start the washing.
8. The washing machines End LED will light when the programme is complete.
• If the door is locked and you switched the washing machine off - or if there’s a power cut
- it will stay locked for 2 minutes.
• If the machine is full of water, do not open the door.
Temp.
Spin
Delay
Start /Pause
Selections
60°C
40°C
Off
Cotton 90°C
Eco 20°C
Cotton
Cotton
Easy Care
Wool
Rinse
Allergy Safe
e
Spin
Daily 60°/60'
Sport
Rapid 15'
Mix
Hand Wash
Delicate
Shirts
Pre Wash
During initial start-up and use of the unit, there may be a slight smell while the motor is
settling in. This is not a fault; this is normal operation.
standard washing
1. Pull the door handle and put the laundry in the drum.
Make sure no laundry gets caught in the door.
2. Close the door and turn the Programme Dial to select
your wash programme and water temperature.
3. Adjust the temperature (if required). The temperature
can not be set higher than the programmes set
temperature.
4. Adjust the Spin Speed (if required).
5. Select any Optional Functions.
6. Add detergent into the detergent drawer. The quantity
of detergent will depend on the amount of laundry,
the degree of soiling and the water hardness. Use the
amount of detergent suggested on the packaging of the
detergent.
To pause the programme you have selected, press
the
Start / Pause
button. The Start/Pause symbol
will blink when the machine is in pause mode.
Temp.
Spin
Delay
Start /Pause
Selections
60°C
40°C
Pre Wash
Kenwood 8kg Washing Machine K814WM18 Manual.indd 20
21/06/2018 08:12
