Kenwood K814WM18 Installation Instructions Manual Download

Page: 14 / 30

the control panel

Temp.

Spin

Delay

Start /Pause

Selections

60°C
40°C

Off

Cotton 90°C

Eco 20°C

Cotton

Easy Care

Wool

Rinse

Allergy Safe

Spin

Daily 60°/60'

Sport

Rapid 15'

Mix

Hand Wash

Delicate

Shirts

Pre Wash

Programme Dial

Different wash programmes can

be selected according to your

wash requirements.

LED Display

• The delay icon will be on to indicate the delay time.
• After the wash procedure begins, the display will show the wash

remaining time, spin speed and other function options.

• When the child lock function is selected, the Child Lock icon will be

illuminated.

• When the door is at the lock state, the Door Lock icon will be illuminated.

If you want to cancel any programme running:

• Switch the programme knob to

OFF

position.

• Your machine will stop the washing operation and the programme will be cancelled.

(Ensure the Child Lock is off, otherwise the original programme will continue.)

• To empty the water accumulated in the machine switch the programme knob to any

programme.

• Your machine will perform the necessary discharge operation and cancel the programme.
• You can then select a new programme.

During initial start-up and use of the unit, there may be a slight smell

while the motor is settling in. This is not a fault; this is normal operation.

Button

Function

Temp

Press continuously to select the desired temperature of the selected wash

programme. You can only select a temperature lower than the selected

programmes temperature. 90°C - 60°C - 40°C - 30°C or - - (cold)

Spin

Press continuously to select the desired spin speed of the selected wash

programme. 1400 - 1200 - 800 - 600 - 400 - OFF (- -)

Delay

This button is used to delay the wash. Press continuously to select the time you

want to start the wash. You can set a delay time of up to 23 hour.

Pre Wash

Press this button to get an extra wash before main wash.

Child Lock

Press and hold the Delay and Pre Wash buttons at the same time until you see

‘CL’ in the display to activate the child lock.

Start/Pause

Press to start your wash. Press while in operation to pause your wash.

Kenwood 8kg Washing Machine K814WM18 Manual.indd 14

21/06/2018 08:12

Summary of Contents for K814WM18































Search results

Summary of Contents for K814WM18

Reviews:

Related manuals for K814WM18

Brands by name

Popular brands

Kenwood K814WM18, Installation Instructions Manual

Search results

Summary of Contents for K814WM18

Reviews:

Related manuals for K814WM18

Brands by name

Popular brands