Kenwood K20MSS10, Instruction Manual

Page: 21 / 32

21
1. Press the microwave button once and the
LED display will show “
P100
”. Press the
microwave button repeatedly until the LED
display show “ P80 ”.
delay start cooking (programme set in advance)
For delay start cooking , follow the steps below.
For instance: The current time is 12 o’clock (noon) and you want to cook with 80% microwave
power for 5 minutes at 1:30 o’clock in the afternoon.
2. Press the start/+30sec/confirm button to
confirm the microwave power level. Turn
the timer/weight/auto menu dial to adjust
the cooking time until the LED display
shows “ 5:00 ”.
3. Press the clock/pre-set button to preset
the starting time for the cooking. The hour
digits will flash first. Turn the timer/weight/
auto menu dial to adjust the starting time
until the LED display shows “ 13:00 ”.
4. Press the clock/pre-set button to preset
the starting time for the cooking. The
minute digits will flash first. Turn the timer/
weight/auto menu dial to adjust the
starting time until the LED display shows
“ 13:30 ”.
5. Press the start/+30sec/confirm button
to complete the setting. The microwave
will sound when the count down reaches
the starting time and cooking will start
automatically.
6. Press the stop/clear button once to stop
the cooking. Press the stop/clear button
again to cancel the setting.
You can set a maximum of 2 stages for delay start cooking. Defrosting cannot be set as one
of those stages. Ensure the door is closed prior to setting the programme.
3, 4
2, 5
6
1
2, 3, 4
Alternatively, after you press the
microwave button once, you can turn the
timer/weight/auto menu dial to change
the power level.
Do not press the
start/+30sec/confirm
button at this stage.
To find out the preset time, press the
clock/pre-set
button once while the
microwave is still in the preset state. It will
last for 2-3 seconds and then return to its
original display.
K20MSS10_IB_RC_131230_Michelle.indd 21 06/02/2014 12:09 PM