7
System connection
Preparation section
Connection of speakers
1
Align the tabs on the stand with the notches
on the stand mount position of the satellite
speaker.
The satellite speaker comes without the stand attached to it. It is required to attach a stand to the
satellite speaker before connecting it to the main unit. However, if required, the satellite speaker
can be installed without a stand. In this case, attach the provided cushion on the bottom of the sat-
ellite speaker.
Assembling the satellite speaker
1. Color irregularities on the TV screen may also be produced depending on the method how the speakers are installed.
When color irregularities are observed after the speaker installation, first turn the TV off, wait for 15 to 30 minutes and turn
it on again: The interference may be improved by the self-demagnetizing function of the TV. If the color irregularities still
remain, install the speakers more apart from the TV.
2. If a source of magnetism such as a magnet is located near the speakers, its interaction with the speakers may cause
color irregularities on the TV screen. Also take care of this point when installing the speakers.
3. Due to induction by the electromagnetic waves produced by a TV, the speakers may produce sound even when the stereo
unit is turned off. In this case also, install the speakers more apart from the TV.
Installation of speakers and positioning of TV
2
Turn the stand clockwise until it is stopped.
