Kenwood HM-DV5 Instruction Manual Download

Page: 67 / 72

In case of difficulty

Knowledge sections

The input selection of the TV and/or AV amplifier is incorrect or

these devices are not turned on.

Connection cords are connected improperly.

The picture disturbance during forward search or reverse is normal.

This is not a malfunction.

Connection cords are connected improperly.

A device generating noise is installed near the signal path.

The disc is dirty or damaged. To prevent this, remove dirt and

handle discs carefully so as not to damage them.

„

There may be condensation of dew on the optical lenses. In this

case, leave the player with power ON for a few hours to dry up

the condensation, then retry operation.

The disc type should be detected and motor rotation stabilized

before starting playback. This is normal and not a malfunction.

The reproduced video may be disturbed or audio may be skipped

when the disc surface is stained with fingerprints or dirt. Clean

the disc surface by wiping it in the radial directions using a soft

cloth.

„

If the disc is placed obliquely or on another disc, place the disc

correctly.

™

Playback may be unavailable due to viewing restriction or region

code problem.

The video format of the played disc does not match that of the

connected TV.

Menu playback is not available when P.B.C. is Off.

‹

Menu playback is possible only with P.B.C.-compatible VCDs.

Subtitles are not displayed when the played DVD does not con-

tain the recording of subtitles.

The subtitle language is set to "

Off

The language cannot be switched when the played DVD does not

contain the recording of multiple audio (or subtitle) languages.

The viewing angle cannot be switched when the played DVD

does not contain the recording of multiple angles. The viewing

angle can neither be switched in part where no angle is recorded.

If you have forgotten the password, reset the initial settings you

made till now to the factory setting.

If the played DVD does not contain the default language set by

the user, the priority language specified for the disc will be se-

lected.

Remedy

DVD/CD player section

Playback starts but the video is not output.

The picture is disturbed during forward search

or reverse search.

The picture is not neat or the video or audio

quality is poor.

It takes long time before playback starts.

A warning is displayed on the TV screen and

playback is not possible.

The top and bottom edges of the picture are cut

off.

VCD cannot be played with menu playback.

Subtitles are not displayed.

Audio (or subtitle) language cannot be

changed.

Viewing angle cannot be changed.

The viewing restriction (Rating) cannot be

changed.

The selected audio or subtitle languages is not

played.

Symptom

Summary of Contents for HM-DV5









































































Search results

Summary of Contents for HM-DV5

Reviews:

Related manuals for HM-DV5

Brands by name

Popular brands

Kenwood HM-DV5, Instruction Manual

Search results

Summary of Contents for HM-DV5

Reviews:

Related manuals for HM-DV5

Brands by name

Popular brands