Kenwood HM-DV5 Instruction Manual Download

Page: 24 / 72

Basic use method

Basic section

The search speed can be selected from 5 speed steps.
(With a MP3 disc, forward search and reverse search
are possible only in a single speed.)

When OSD is displayed, pressing the

ON SCREEN

key

turns it off and shows the speed in place.

Video may be disturbed during forward search or re-
verse search.

Press the

DVD/CD

key to resume normal play-

back.

Forward search and reverse search

DVD

VCD

MP3

A track is skipped and playback starts from the begin-

ning of the skip destination track,chapter or file. (With

DVD VIDEO, this operation is available only in the

middle of play mode.)

When the

key is pressed once during playback,

playback restarts from the beginning of the current

track, chapter or file.

With a VCD and P.B.C. is on, these buttons function as

the

(

Previous

) and

(

Next

) key.

‹

To skip

backward

To skip
forward

Forward
search

Reverse

CDを聴く

TUNING DOWN

TUNING UP

P.CALL DOWN

P.CALL UP

Skipping a track, chapter, or file

DVD

VCD

MP3

Slow playback and reverse slow playback

DVD

VCD

When OSD is displayed, pressing the

ON SCREEN

key

turns it off and shows the speed in place.

Audio is not output during slow playback or reverse slow
playback.

Reverse slow playback is not available with VCD.

Press the

DVD/CD

key to resume normal play-

back.

Slow playback

Reverse slow

playback

TUNING DOWN

TUNING UP

Playback

Remote control unit only

Press the

key or

key in still mode to select

one of 5 available speeds.

Press once during playback to initiate forward or re-
verse search at a low speed.

Summary of Contents for HM-DV5









































































Search results

Summary of Contents for HM-DV5

Reviews:

Related manuals for HM-DV5

Brands by name

Popular brands

Kenwood HM-DV5, Instruction Manual

Search results

Summary of Contents for HM-DV5

Reviews:

Related manuals for HM-DV5

Brands by name

Popular brands